Spiral Bevel Gears

We offer spiral bevel gear solutions for quiet operation and high torque transmission.

Spiral Bevel Gears

At Önel Dişli, we manufacture spiral bevel gears for applications that require high torque capacity and quiet operation, based on DIN and ISO standards. We supply spiral bevel gear solutions to a wide range of industries, especially gear reducers, automotive differentials, industrial gearboxes and heavy machinery.

What Is a Spiral Bevel Gear?

Spiral bevel gears are advanced engineering components that transmit power between two different axes; they run much more quietly than straight bevel gears and have a high load-carrying capacity. Thanks to the curved tooth geometry, the contact area increases and vibration and noise are significantly reduced. These gears, which usually transmit power between intersecting axes at 90°, are the preferred engineering solution for high-speed and high-torque applications where straight bevel gears fall short.

How Are Spiral Bevel Gears Manufactured?

Spiral bevel gear production is an advanced manufacturing process that requires far more precise machine settings and special cutting tools than standard gear milling. With our CNC spiral bevel gear cutting machines, we produce gears with high geometric accuracy. Tooth profile, spiral angle and cone ratio are determined according to customer requirements; where required, surface quality is optimised with heat treatment, grinding and honing.

Types of Spiral Bevel Gears

The main spiral bevel gear types we manufacture are:

  • Spiral Bevel Gear: The most common type; provides quiet, high-capacity power transmission with its curved tooth geometry
  • Hypoid Gear: Runs with offset, non-intersecting axes; widely used in differential systems
  • Zerol Bevel Gear: Has a zero spiral angle but keeps the advantages of curved-tooth geometry, minimising axial thrust


Applications of Spiral Bevel Gears

Spiral bevel gears are preferred in every application that requires power transmission with a change of axis:

  • Automotive Differentials: Axle shaft direction change and torque distribution systems
  • Industrial Gear Reducers: Drive units requiring right-angle power transmission
  • Machine Tools: Milling and lathe gearboxes
  • Mining Equipment: Drive systems requiring heavy loads and high torque
  • Food and Pharmaceutical Machinery: Production lines requiring hygienic and quiet operation


Custom Spiral Bevel Gear Manufacturing

We also manufacture custom spiral bevel gears to customer drawings. Orders of every size are accepted, from prototype to series production. Our engineering team provides technical support for applications requiring non-standard spiral angles, cone ratios or special materials.

Spiral Bevel Gear Prices

Spiral bevel gear prices vary according to gear type (spiral bevel, hypoid, Zerol), spiral angle, cone ratio, number of teeth, material and the surface treatments applied. With our competitive pricing and commitment to quality production, we are a trusted supplier in the industry. To request a quotation, please contact us via our contact form.


Frequently Asked Questions

What is the difference between spiral bevel and straight bevel gears?

On straight bevel gears the teeth are cut straight, while on spiral bevel gears they are produced with a curved, spiral geometry. This increases the contact area, makes operation much quieter and vibration-free, and raises load capacity. Spiral bevel gears are recommended for applications that require high speed and low noise.

What is a hypoid gear and how does it differ from a spiral bevel gear?

In spiral bevel gears the two axes intersect at a point, whereas in hypoid gears the axes are offset and do not intersect. This allows hypoid gears to offer higher torque capacity and quieter operation. Hypoid gears are widely used in automotive differentials.

Between which axes do spiral bevel gears transmit power?

Spiral bevel gears usually transmit power between axes intersecting at 90°. In the hypoid type the axes are offset and do not intersect. This makes spiral bevel gears indispensable in every system where power must be transmitted with a change of direction.

What materials are used for spiral bevel gears?

Depending on the application, case-hardening steel, quenched and tempered steel or stainless steel is used. For applications requiring high load and wear resistance, material performance is optimised with heat treatment and surface hardening.

Is a technical drawing required to manufacture a spiral bevel gear?

A technical drawing is ideal but not mandatory. We can also manufacture from a sample of the existing gear and basic data such as spiral angle, cone ratio and number of teeth. Our engineering team manages the process by carrying out the necessary measurements and calculations.

What is the minimum order quantity and delivery time?

We accept orders of every size, from prototypes and single parts to series production. Standard orders are delivered in 5–10 working days on average, and priority production is available for urgent orders.

01

Quiet Operation

The curved tooth geometry provides much quieter, vibration-free operation compared with straight bevel gears.

02

High Torque Capacity

The larger tooth contact area ensures reliable power transmission at high torque values.

03

Quality Materials

Long-lasting, wear-resistant spiral bevel gears are produced from high-strength steel alloys.

04

Surface Treatment

Case hardening, nitriding and induction hardening are applied on request to increase wear resistance.

Our Production Capacity

The technical specifications and production capacity we offer for spiral bevel gear manufacturing are listed below.

Gear TypeSpiral Bevel
Module RangeModule 1 – 12
Diameter Range20 mm – 800 mm
Shaft Angle45°, 60°, 90° and Custom
MaterialSteel, Alloy Steel
Accuracy GradeDIN Grade 5 – 7
Surface TreatmentCase Hardening, Nitriding, Induction Hardening
Minimum Order1 Piece (Prototype)
Spiral Bevel Gears

Spiral Bevel Gears
Areas of Application

Gear Reducer Systems

Widely used in industrial gear reducers for power transmission applications requiring high torque and quiet operation.

Automotive Differentials

High-load-capacity spiral bevel gears are used in the front and rear axle differentials of vehicles.

Industrial Gearboxes

Spiral bevel gears are preferred in heavy-industry gearboxes for highly efficient power transmission.

Agricultural Machinery

High-strength spiral bevel gears are used in the power transmission systems of tractors and agricultural equipment.

Mining Equipment

Spiral bevel gears are preferred in the power transmission systems of mining machinery operating under heavy loads.

Marine Vessels

High-torque spiral bevel gears are used in marine gearboxes and the power transmission systems of vessels.

Spiral Bevel Gears Get a quick quote Spiral Bevel Gears
Contact Us
WhatsApp Message us for a quick quote
Phone +90 212 674 30 99
Contact Us Our contact details