CALCULATORS
← All Calculation Tools
// TS 1845-2 / EN ISO 20286-2
ISO Fits & Tolerances
Shaft and hole tolerances according to ISO 286. 13 standard size ranges from 0 to 500 mm.
±deviation = es / ei (μm)
Shaft Tolerance
lower case — shaft
Select the shaft tolerance
Hole Tolerance
upper case — hole
Select the hole tolerance
ISO Fits: Shafts use lower-case letters (a–x), holes upper-case (A–X). The number is the IT grade (smaller = more precise). H7/h6 is a clearance fit, H7/k6 a transition fit and H7/p6 an interference fit. Values are in μm.